Yewhort is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Blendjet blenders have gained popularity for their portability and convenience. However, like any electronic device, they can encounter issues from time to time. One common problem is when the Blendjet blender displays blinking red and purple lights. Don’t panic; this issue can usually be resolved with a few simple steps.
In this guide, we’ll explore the possible reasons for this problem and provide step-by-step solutions to get your Blendjet back to blending smoothly.
Why Is Your BlendJet Blinking Red and Purple? And How to Fix It?
Your BlendJet may blink red and purple lights, leaving you confused. This section will discuss the reasons your BlendJet may be flashing these colors and explain each issue.
To enjoy smooth blending experiences, it’s crucial to know how to identify specific problems and troubleshoot them effectively. Here’s a step-by-step guide to help you pinpoint the issues:
Overheating
A safety mechanism prevents BlendJet from overheating. Red and purple lights blink when the blender’s motor or components overheat. To prevent blender damage and ensure user safety, this feature is essential.
If the BlendJet is used continuously or struggles to blend thick ingredients, its motor can overheat. The blinking lights indicate a device cooling break.
The overheating warning shows BlendJet’s dedication to user safety and product longevity. It reduces accidents and heat damage to the device. It also encourages users to blend in short bursts and avoid overloading the blender with dense ingredients
Blocked Blades
Sometimes an obstruction prevents your BlendJet’s blades from spinning. When this happens, the blender struggles to blend, causing red and purple blinking lights.
BlendJet blades chop, puree, and blend ingredients. Small pieces of fruit, seeds, and other debris can get caught in the blade assembly. Blinking lights indicate resistance when the blender detects it.
The blocked blades warning keeps your BlendJet running smoothly. It warns you to check the blades for obstructions to protect the motor and blades. Maintaining the blender’s performance requires regular blade inspection and cleaning.
Carefully unscrew the blades from the blending jar. Be cautious while handling the blades to avoid any accidents.
Wash the blades thoroughly with soap and warm water. Ensure that all residue is removed. You can use a brush or a sponge to clean hard-to-reach areas around the blades.
Once the blades are clean and dry, reattach them to the blending jar, making sure they are securely screwed in place.
Motor Problems
A BlendJet motor issue may cause the red and purple blinking lights in rare cases. This is a rare issue that should be addressed if suspected.
The BlendJet motor powers the blades to blend ingredients. If the motor malfunctions due to wiring or mechanical issues, the lights may blink. A faulty motor can make the BlendJet unusable or perform poorly.
Motor issues are rare, but they emphasize product quality and customer support. BlendJet’s warranty and customer service team can help users fix motor issues and keep their BlendJet working.
Bad Blendjet Battery
The Blendjet operates on a rechargeable battery, and if it’s running low or not working properly, it may display this color pattern.
Begin by pressing the power button on your Blendjet twice. This action will activate the battery level indicator. If all four lights illuminate, congratulations, your battery is fully charged. However, if only one light appears, it’s a clear indication that your battery level is critically low.
Low battery voltage can cause the Blendjet to malfunction and display red and purple lights. This simple fix is essential to ensure your Blendjet operates optimally. Regularly charging your blender after use can prevent this issue from occurring.
Thus, to resolve this issue, connect your Blendjet blender to a charger and let it charge for at least two hours. Ensure that the charging cable is securely connected to both the blender and a power source. Once the battery is fully charged, try turning the Blendjet on again.
Ensuring The Blendjet Jar Is Correctly Attached
Another common reason for Blendjet blenders to display blinking red and purple lights is an improper attachment of the blending jar. The jar must be securely attached to the base for the blender to function correctly. Here’s what you need to do:
Check if the blending jar is tightly screwed onto the base. If it’s loose, this can disrupt the connection and lead to the blinking lights issue. Simply tighten the jar by turning it clockwise until it’s snugly in place.
If the blinking lights persist, try detaching the jar completely and then reattaching it. Make sure it sits correctly on the base. Sometimes, a slight misalignment can trigger the error lights.
Power Cycle the BlendJet
If charging didn’t resolve the issue, try power cycling your BlendJet:
- Turn off the blender if it’s on.
- Press and hold the button for about six seconds.
- Release the button when the lights stop blinking.
- This simple reset can often resolve minor software glitches that cause the blinking lights.
Updating the BlendJet Firmware
If the issue persists, it might be related to outdated or corrupted firmware. Here’s how you can update it:
- Install the BlendJet app on your smartphone.
- Connect your BlendJet blender to the app via Bluetooth.
- Check for available firmware updates and install the latest software version.
- Updating the firmware can fix compatibility issues and bugs, potentially resolving the blinking lights problem.
Replacing The Blendjet Battery
One of the primary reasons for the blinking red and purple light on your Blendjet may be a depleted or faulty battery. Here’s a step-by-step guide on how to replace the battery:
- Start by opening the Blendjet’s lid to access the battery compartment.
- Carefully remove the old battery from its slot. Be gentle to avoid damaging any components.
- Ensure that the new battery is the correct model for your Blendjet. Insert it into the battery compartment, making sure it’s securely in place.
- Plug your Blendjet into a power source and let it charge for a while. It’s important to ensure the battery is fully charged before using the blender again.
- Replacing the battery is often an effective solution for the blinking red and purple light issue. However, if the problem persists, there might be other underlying causes.
Contacting Blendjet Support
If replacing the battery doesn’t resolve the blinking light problem, it’s time to seek assistance from Blendjet’s customer support. Here’s how you can get in touch with them:
Go to Blendjet’s official website and navigate to the “Contact Us” section. Here provide your name and email address. This information will be used to reach out to you.
In your message, explain the issue you’re facing with your Blendjet. Include details about the blinking red and purple light and any troubleshooting steps you’ve already taken.
Blendjet’s customer support team is trained to assist with a variety of issues, and they will guide you through additional troubleshooting steps or provide further instructions based on your specific situation.
Liquid Damage and Blendjet Repair Options
Sometimes, the blinking red and purple light on your Blendjet could be a result of liquid damage. If you’ve accidentally spilled liquid on your Blendjet, here’s what you can do:
Carefully disassemble the Blendjet, if possible, and use a dry cloth to thoroughly dry all the blender’s components. Ensure there is no moisture left inside.
If the liquid damage is severe and the blinking light persists, it might be necessary to seek professional help. Contact Blendjet’s customer care and inquire about Blendjet repair services. They can provide guidance on how to proceed.
Watch this Youtube short
Is It Safe to Use a BlendJet Portable Blender While Charging?
BlendJet portable blenders should not be used while charging, and most cannot be used. This precaution is for blender safety and design. When you charge your BlendJet, it prioritizes battery life over blending. Using it during this time may cause device damage or malfunction.
The restriction may be related to power management. Combining charging and use can strain a device’s battery and circuitry. This can overheat and cause electrical problems, posing a safety risk.
The manufacturer wisely designed BlendJet models to prevent operation while charging to protect users and the device.
How Do You Know If Your BlendJet Is Charging?
To ensure your BlendJet is ready when you need it, know its charging status. The BlendJet shows charging status visually. The light ring around the power button changes color depending on the model.
When fully charged, BlendJet Two’s lights turn purple to blue, forming a blue circle. Fully charged BlendJet One turns red to green.
User-friendly indicators eliminate charging guesswork. They keep your BlendJet ready for action, letting you plan your blending activities.
The simple charging status notification improves the BlendJet portable blender user experience.
FAQs
How do I properly store my BlendJet Blender?
You can store your BlendJet in a cabinet or on your countertop. Keep the lid slightly open to let excess water evaporate.
Maintaining your BlendJet’s functionality and hygiene requires proper storage. Allowing moisture to evaporate prevents mold and odors inside this water-resistant material.
Can BlendJet go in the dishwasher?
The BlendJet base, jar, and lid should never be washed, even though it’s water-resistant.
Avoid damaging your BlendJet by cleaning it manually. The blender may be damaged by dishwasher heat and moisture.
Can you drink out of a BlendJet?
You can easily use the BlendJet as a bottle. The mixture need not be poured into a glass. Drink it straight from the blender. What I like about this product is its convenience.
The BlendJet’s portability makes it convenient for blender drinkers.
Can I put frozen fruit in my BlendJet?
The BlendJet 2 is perfect for making sauces, salad dressings, smoothies, baby food at the table (at home or not), and more. The BlendJet 2 can process frozen fruit and ice if your recipe is mostly liquid.
The BlendJet 2 can blend frozen fruit, but you need enough liquid. This versatility makes it ideal for cold drinks and recipes.
How do I clean my BlendJet Blender?
Water with a drop of soap cleans BlendJets. Rinse with plain water before making your next blended creation. Regularly deep-clean your BlendJet.
Maintaining BlendJet hygiene and performance requires regular cleaning. A mild soap solution and thorough rinsing keep it clean and ready to use.
What is the difference between BlendJet One and BlendJet 2?
BlendJet 2 holds more than BlendJet 1. The water-resistant BlendJet 2 has USB-C charging. The BlendJet 2 is faster and stronger.
The BlendJet 2 is more advanced and versatile than the BlendJet One due to its higher capacity, faster blending, water resistance, and USB-C charging.
