[FIXED] Maytag Washer 5D Error Code

"This image" by Birdies100 is licensed under CC BY-SA 2.0

Yewhort is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Tired of your Maytag washer throwing a 5D error code tantrum? We’ve got the fix! In this quick guide, we’ll unravel the mystery behind this code and show you how to make laundry day drama-free. Say goodbye to detergent dilemmas and washing woes – we’ve got your back.

Let’s dive into the world of [FIXED] Maytag Washer 5D Error Code and get that washing machine back on track in no time!

 

Maytag Washer 5D Error Code – What Are The Causes?

Maytag washers are reliable and efficient, but like any appliance, they can break down.

One of the most common issues that a Maytag washer runs into is the 5D error code. 

The 5D error code is often caused by excessive detergent use. Many people think more detergent means cleaner clothes, but this can damage your washing machine. Extra detergent in your Maytag washer can cause excessive suds during the wash cycle.

The machine then needs more time and water to rinse these suds, which may damage the fabric. Your clothes may also become weakened by detergent residue, causing skin irritation.

Moreover, overloading your washing machine is a common Maytag 5D error code cause. Too many clothes in the washer make it hard to clean and rinse. This lowers wash quality and stresses machine parts.

Besides the above-listed causes, the following issues can trigger the Maytag 5D error code:

  • Incorrect Detergent
  • Drain Line Blockage
  • Clogged Drain Pump
  • Incorrect Water Temperature
  • Water Inlet Valve Fault
  • Stuck Switch
  • Water Leakage
  • Heating Element Fault
  • Thermistor Fault

 

Maytag Washer 5D Error Code – How To Fix It?

In this guide, we’ll explore the steps to fix the Maytag washer 5D error code and keep your appliance running smoothly.

1. Remove Residual Detergent

One of the primary causes of the Maytag washer 5D error code is excessive sudsing due to too much detergent usage. 

To address this:

  • If your washer is currently displaying the 5D/SD error code, let it finish its current cycle. It may require multiple rinses and drains to remove the excess soap.
  • If you believe you are using the correct type and amount of detergent but the 5D error code persists, it’s a good idea to run a “Clean Washer” cycle. This cycle is designed to clean the interior of your machine, including any residual soap buildup. Refer to your owner’s manual for instructions on running this cycle.

2. Remove Some of the Clothes and Restart the Cycle

Overloading your washer is another common reason for the 5D error code. To resolve this issue:

  • Carefully remove some clothes from the washer to create a more balanced load. Overloading can not only trigger error codes but also put unnecessary strain on the washer’s components.
  • After adjusting the load, restart the spin cycle. This should help the machine operate more efficiently without triggering the 5D error.

3. Check the Water Temperature

Ensure that you are using the appropriate water temperature settings for your laundry. Consider using warm or cold water rather than hot to avoid potential problems.

4. Repair Water Leakage

Periodically inspect the washer hoses and the door seal for any signs of leakage or wear. If you notice any leaks, address them promptly to prevent further complications. Repairing leaks not only maintains the washer’s efficiency but also prevents potential damage to your laundry area.

5. Fix the Heating Element

  • Begin by carefully inspecting the heating element for any visible damages or faults.
  • Ensure you have the necessary safety gear, such as gloves and safety goggles, before proceeding.
  • Check the wiring connections and thermostat for loose connections or damaged components.
  • Replace any faulty parts or wiring that you find.
  • After completing the repair, recalibrate your washer and run a test cycle to confirm that the 5D error is resolved. 

6. Inspect the Thermistor

  • To access the thermistor, remove the washer’s top panel.
  • Use a multimeter to test the thermistor’s electrical continuity.
  • If any problems are detected, replace the faulty thermistor promptly.
  • Disassemble the old thermistor, remove it carefully, and replace it with a new one.
  • Test the washer to ensure that the 5D code no longer appears. The thermistor plays a crucial role in regulating the washer’s temperature, which can impact drainage.

7. Check the Drain Hose

  • Washing machines produce lint that can accumulate in the drain hose over time.
  • Inspect the drain hose for blockages, kinks, or crushing that may restrict water flow.
  • If you find a blockage, remove it to allow proper drainage.
  • Ensure the drain hose is not bent or twisted, as this can also impede water flow.
  • Regularly cleaning the drain hose and ensuring it is free from obstructions can prevent drainage issues.

8. Inspect Drain Hose for Clogs

Another step in addressing the 5D error code is to check the drain hose for any clogs or obstructions. 

To do this:

  • Unplug the washer from the power source.
  • Access the drain hose, usually located at the back of the machine.
  • Remove the hose and inspect it for any blockages. Use a flashlight to get a clear view.
  • If you find any clogs, carefully remove them. You can use a pipe cleaner or a straightened wire to clear obstructions.

9. Inspect Drain Pump and Filter for Blockage

If the drain hose is clear, the next step is to examine the drain pump and filter for blockages. Lint and other debris from your laundry can accumulate in these components and hinder water flow. Here’s what to do:

  • Unplug the washer.
  • Access the drain pump and filter. Consult your washer’s manual for specific instructions on how to do this, as the location may vary.
  • Check for and remove any debris or blockages from the pump and filter.
  • Clean any filters along the drain system to ensure smooth water flow.

10. Check the Foam Level Sensor

The foam level sensor plays a crucial role in detecting the amount of suds in the washing machine. If it malfunctions, it can trigger a false 5D error code. To test and potentially replace the foam level sensor:

  • Unplug the washer.
  • Remove the control panel cover to access the sensor.
  • Use a multimeter to check the sensor’s functionality. If it’s faulty, replace it.
  • Reassemble the washer and run a test load to see if the issue is resolved.

11. Check the Main Control Board (Rare)

If you suspect a malfunctioning control main control board is the issue:

  • Unplug the washer.
  • Identify your Maytag washer’s model number and procure the appropriate replacement control board.
  • Replace the control board according to the manufacturer’s instructions.

12. Reset the Washer

Sometimes, error codes can occur due to system glitches. If you’ve tried the above steps and the 5D error persists, try resetting the washer:

  • Press the Cancel/Pause button twice or the Power button once to clear the error code.
  • Attempt to run a load of laundry again to see if the problem is resolved.

13. Are 5d or Sd Error Codes The Same?

Even though they look different, Maytag washers’ 5D and SD error codes are the same. The correct error code is SD, which means “Suds Detected,” indicating excessive washing machine suds. Too many suds can disrupt washing and rinsing, affecting water drainage and machine performance.

The washer’s display screen limits the apparent difference between 5D and SD. Due to these limitations, many users see the code as 5D. However, official documentation and troubleshooting guides use SD for this error code.

 

How to Prevent a Maytag 5D Code?

This section covers how to avoid the Maytag 5D error code.

Use Manufacturer Recommendations

Following the manufacturer’s detergent usage instructions is crucial to preventing the Maytag 5D error code. Extreme detergent use usually causes the 5D code. Avoid this by carefully reading your washing machine’s user manual. It will suggest detergent types and amounts for different load sizes.

Choose HE Detergents

Wash clothes with high-efficiency (HE) detergents. These detergents are made for modern washers like Maytag. HE detergents work well with lower water levels in newer machines and produce less foam. Sudsing from non-HE detergents is a common cause of the 5D error code.

Measure detergent accurately

Preventing the 5D error code requires accurate detergent measurement. Too much detergent causes suds, which disrupts washing and causes the error code. Use the detergent’s measuring cup or dispenser to measure accurately. Consider your washing machine’s dosage and load size.

 

Step-by-Step Maytag Washer Diagnostics

Diagnostic tests on Maytag washers can help identify and fix problems. How to do it step-by-step:

Step 1: Standby Mode

Start your Maytag washer on standby. This means it should be on but not cycling.

Step 2: Diagnostic Mode

Press and hold any washer console button except the Stop, Start, or Power buttons for three seconds. Release and press the button again for three seconds. Repeat three times.

Step 3: Check Indicator Lights

After entering diagnostic mode, all washer control panel indicator lights will turn on for five seconds. The time display will show “88.”

Step 4: Fault Code Check

After the lights and “88” display, the washer will show any fault codes. These codes diagnose appliance issues. Note any display error codes.

Step 5: No Errors

If no error codes appear and the lights go off, the washer didn’t find any issues during the diagnostic test. The display will return to “88.”

Step 6: Testing

Testing starts automatically five seconds after error codes are displayed. The washer will perform tests to identify the issue.

Step 7: End Diagnostic Mode

Press Power or Stop to exit diagnostic mode after testing. This exits diagnostic mode and puts the washer back on standby.

LEAVE A REPLY

Please enter your comment!
Please enter your name here